آپدیت و بروز رسانی های باکس Cyclone

واقعا" آپدیت طوفانی ای بود

Installer v1.02 ==
======================

- RAP3Gv2 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- SX4 Bypass added after PA_SL2 Unlock, if needed
- "Create RPL from phone" added. This is used to backup possible security data from phone in original NMP RPL format (plain one) this includes WMDRM Backup, All low-level certs (Nokia Public Certificate, Common Configuration Certificate, Hardware Certificate, VARIANT Cert), and Original SIMLOCK (only on PA_SL2 Phones !! ), which can be used to simlock restore / counter reset / PM 308 recreate - if needed - this data is sent directly to SIMLOCK SERVER directly so SL recreate is 100% "legal"
- Added Codes Counter Reset for PA_SL2 phones. Used to reset Keyboard/FBUS Code Counter.
- Added BB5 NCK Code FBUS Send (#pw++y), use especially when Keyboard counter is locked.
- Added BB5 NCK COde KEYBOARD Send (#pw++y), use especially when FBUS counter is locked.
- BB5 SL Export added. This exporting phone configuration key + simlock blocks to "SL5" file
- BB5 SL Import added. Used to import previously exported "SL5" structure to phone upon BB5 SP Initialization.
- BB5 PM -> Simlock RPL added, if PA_SL2 phone - use if simlock has been corrupted, and you have only PM backup. If PM have needed fields, it will create plain RPL file which can recreate simlock for you without headache.
- SL5 Creator support for Creating Relocked SL5 for desired MCC+MNC / Profile Bits
- Added "BB5_Autolock_IMSI.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to IMSI (one sim card).
- Added "BB5_Autolock_MCCMNC.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to MCC-MNC (operator).
- BB5 Plain RPL Write added.
- Added "UB Backup" option while writing BB5 Plain RPL (SIMLOCK AREA), since they aren't adding SHA-1 before SIMLOCK_DATA in RPL file - it needs be skipped in case.
- Added "Erase Security" option before RPL write. This is used when phone have problem with PM 308 blocks (downgrade, for example) and can't boot to accept superdongle / simlock data - in case, no need to full erase in case. Keep note that after RPL write YOU NEED SX4 Authorization with server and writing PM Fields 1 and 309. Otherwise your phone will fail to pass ST_SECURITY_TEST, and in effect will not boot.
- Skin stack updated to v6.30, this is more stable and fast
- Product code send added
- HWID send added
- PSN send added
- DCT4 Nand MASS MEMORY Partitioning added before write. May be skipped ticking apporiative Skip MM Part button.
- When no patch file found, SW will generate unlock codes for DCT4 unlock (asics 2,5,6,7)
- Security Code Mastercode is now being generated upon read info
- Added "Skip Patching" Option. Use for DCT4plus phones which are patched already, and all you need is to Initialize SP locks again (relock, etc)
- DCT4 NCK Key / FBUS Count is now being readed correctly
- DCT4 UEM OTP Imei Read added
- DCT4 SP Locks are being parsed upon read
- Added full support for Vista OS
- Added support for 64bit CPUs - tested on X64 XP Professional, should work on NT6 too
- BB5 Simlock backup before flash write no more asking user for directory, it's automaticlly saving to StoredFiles
- BB5 Simlock backup automatically saving backup in RPL format if possible (PA_SL2 phone detected), otherwise it will save it in PM format
- BB5 Booting routines totally refactorized
- After DCT4 Page erase, the last-error-status is now queried from phone
- Data checksum is now being checked again upon BB5 Flash Write
- When NPC Certificate are being backed up during SX4 Bypass, it is now stored as "PUBLIC_ID.Sx4Bypass.NPC.CMT.CRT", not "DowngradeRepair" as before
- When Writing BB5 Cert, it's now default pointing to StoredFiles
- User is now being warned before "Erase all certificates" - BB5 (avoid mistakes)
- For now, Erase All Certs erasing APE certificates too, if APE unit found
- DCT4 Plus 2680 v6.82 unlock partial fixed
- 2630 v57.20 Unlock added
- 2630b v57.20 Unlock added
- 2630b v06.82 Unlock added
- 2760b v06.82 Unlock added
- 2600c-b v06.82 Unlock added
- 1680c v06.82 Unlock added
- 1680c-b v06.82 Unlock added
- 5000db v 05.27 Unlock added
- 5000db v 05.45 Unlock added
- Included old "new security" unlock partials for 2630, 1680, 5000, 2680 - v6.82
- FastMM problem after exiting Main Application fixed
- Some DCT4Plus unlock bugs fixed (like This is Invalid Integer...)
- Added WD2 CBUS BT Phones support (bluetooth flashing problems)
- Check Flashing Bus (BB5) now booting phone completly, not only fetching 1st Boot Data
- Fixed problem when sometime wrong CMT / APE bootloader are being selected upon Certificate Operations
- Increased FBUS Timeout to repair FBUS transactions problems on some environments
- Netmonitor activation on DCT4/WD2 added
- WD2 Format User Area added
- "Initial SP corrupted" fixed on DCT4plus phones
- After finished flashing the sound now being played
- Cyclone HW Revision A112 support added
- Progressbar issue fixed while BT Flash
- SX4 Server Transaction fixed
- Bigger delay added after SX4 Bypass in order to handle PM write correctly
- More debug messages is now being shown upon BB5 booting
- Refactorized DCT4 ADSP Flashing routines
- DCT4 / BB5 Factory defaults after flashing fixed in some cases
- Minor changes and bugfixes
- Improved BB5 Local/Test mode changes
- Support : Fixed "Connection closed gracefully" in some cases
- Fixed problems when invalid IMEI are being readed out from phone (in case of phone wasn't initialized and FBUS problems occured)
- PM Write routines rewritten
- Security card is now being resetted before phone flashing, this have effect on authenthication speed when flashing many phones one by one
- Selftests routines improved (dynamic timeout)
- Multiple files can be now choosen upon Writing Certificates saved as "CRT" (Cyclone binary format)
- BB5 SP Locks now being parsed upon read out (blocks count, block content, etc)
- DCT4Plus partials with version 6.82 have now removed from supported UPP list ASIC ID "3168" which is not unlockable (for now) with rom 0600 to avoid destroyed phones (no signal), in case you will got message "Not supported UPP ID", but your phone SL area will be untouched and after flash it will still work.
- Blue screen of death fixed on some configurations
- After PM Write, Statistics added, so user can easily see how many PM Record written OK / NOT OK
- IMEI in "Credits" upon calculation is now checked for validity (last digit)
- Updated Message before using DCT4 RPL Credits - ASIC 11 takes 2 credits and rest 1 credit
- Main Nokia Firmware v1.03 avaiable, this changes:
-- TX2 Output pin is now constant (Service Pin 3) due to many mistakes on user side.
-- Flash write speed optimized, should be around 10% - 30% faster, especially on NAND-ONENAND phones. More optimizations to come.
-- Erase status is now signalized by USB (red) led.
-- Added support for WD2 CBUS BT Flashing
-- BB5 Booting Improved on some environments
-- RTOS Code Updated to 5.2.0
-- Microcode USB Stack is now Vista compatible
-- Removed blue screen of death problem on some XP configurations
-- Minor bugs, fixes, and improvments
- Versions snap
Installer v1.02
Main x86 Application v1.0.0.7396
x86 Memory Manager v4.92R2
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.03
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090502
Communication Stack SSLv3-keys-06092008
Skin Stack v6.30

!! WHERE TO DOWNLOAD !!
Download Mirror :http://www.cyclonebox.com/downloads

** SOME NOTICES **

!! UPGRADE YOUR BOX FIRMWARE to version 1.03 !!
Of course we can't force you to do that, but you will loose some functionality (CBUS Flashing, UEM Reading, VISTA Support, etc).

!! UPGRADE YOUR BOX DRIVERS TO VERSION 1.0.0.4 !!
Drivers should be updated automatically after installation using DPInst, but who knows.

!! ABOUT INSTALLATION !!
You don't need to uninstall previous installation. Just install this version and It will automatically purge previous one (delete old drivers, loaders) and install just new one.

• اضافه شدن آنلاک مدلهای زیر :
• 2680 v06.31
• 2680b v06.31
• 5000d v06.17
• 5000d-b v06.17

[boy18iran]

ورژن جدید اما آزمایشی ارائه شد.

• شما میتونین به وسیله این ورژن گوشی های 5800 - N96 - E75 رو آنلاک کنین.
• همچنین ورژن نهایی هم به زودی ارائه میشه.
• فراموش نکنین که فیرمور باکس خودتون رو آپدیت کنین تا بتونین ورژن 1.0.5 رو استفاده کنین.

امکان Unlock رایگان گوشی Nokia 5800 در Cyclone ...

Cyclone Box قادر به آنلاک رایگان گوشیهای Pa-Sl2 (گوشیهایی که از طریق برنامه Dejan یا Dk-Sl2 آنلاک میشوند) از طریق روش کاملا" ایمن Nck (وارد کردن کد آنلاک از طریق کابل ) است همچنین آنلاک رایگان گوشیهای Bb5 و BB5+ و Dct4 و Dct4+ توسط Cyclone پشتیبانی میشود

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7828
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.05, (Jun 22 2009 12:23:29, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT ; BB5-NCK-CALC
Box Serial Number: C0x
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: Dx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.05v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 1.47v PASSED
VBAT Voltage 4.93v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Failed to read info -> Phone not detected
MCU Version V ICPR72_09w02.3
MCU Date 26-01-09
Product RM-356
Manufacturer (c) Nokia
IMEI 354216035152812
Mastercode 455563675
IMEI Spare 3A45120653518201
IMEI SV 3345120653518241F0000000
CNT V 20.0.012
PSN CCI701685
Product Code 0584583
Basic Product Code 0552692
PSD 0000000000000000
LPSN 0
WLAN MAC 002548F8F82C
APE SW V 20.0.012
APE Variant V 20.0.012V 20.0.012 20.0.012.395.01
APE Test 2008wk50v0.012
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 1101
RFIC 17141715
DSP ICPR72_09w02
Simlock Server SIMLOCK SERVER
Simlock Key 2320300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23203F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 23207F
Backing up simlock...
MCU Version V ICPR72_09w02.3
MCU Date 26-01-09
Product RM-356
Manufacturer (c) Nokia
IMEI 354216035152812
Mastercode 455563675
Simlock backup OK, saved to RM-356_354216035152812_7192009_61847 PM.SLBackup.PM
BB5 Unlock Started...
MCU Version V ICPR72_09w02.3
MCU Date 26-01-09
Product RM-356
Manufacturer (c) Nokia
IMEI 354216035152812
Mastercode 455563675
Simlock Server SIMLOCK SERVER
Simlock Key 2320300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23203F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 23207F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0C1001142A7A0052094DB1355647951711F15826
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0C1001142A7A0052094DB1355647951711F15826
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+609990508328285+1#
#pw+774411792439111+2#
#pw+702440506943208+3#
#pw+390081639141439+4#
#pw+554953756521970+5#
#pw+176228468667514+6#
#pw+889209902766327+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V ICPR72_09w02.3
MCU Date 26-01-09
Product RM-356
Manufacturer (c) Nokia
IMEI 354216035152812
Mastercode 455563675
Simlock Server SIMLOCK SERVER
Simlock Key 2320300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 23203F
Simlock [2,1] State: OPENED Type: MCC-MNC Data: 23207F
Simlock NCK #pw+889209902766327+7#
Unlock finished!

امکان Unlock رایگان گوشیهای BB5

آنلاک مدلهای زیر رایگان است :

RAPIDO: (SL1)
* N95 (RM-159)
* N95 (RM-245)
* N95 (RM-160)
* E90 (RA-6)
=======================
RAP3GV2 models: (SL1)
* 6630 (RM-1)
* 6680 (RM-36)
* 6681 (RM-57)
* 6682 (RM-58)
* N70 (RM-84)
* N70-5 (RM-99)
* N71 (RM-67)
* N90 (RM-42)
* N91-1 (RM-43)
* N91-8GB (RM-43)
* N91-5 (RM-158)
* N93 (RM-55)
=======================
Rap3Gv3 phones: (SL1)
* 3109c (RM-274) -
* 3110c (RM-237) -
* 3250 (RM-38)
* 3500c (RM-272)
* 3500cb (RM-273)
* 5200 (RM-174)
* 5200b (RM-181)
* 5300 (RM-146)
* 5300b (RM-147)
* 5500 (RM-86)
* 5700 (RM-230)
* 5700 (RM-302)
* 6085 (RM-198)
* 6086 (RM-188)
* 6086b (RM-260)
* 6125 (RM-178)
* 6126/6133 (RM-126)
* 6131 (RM-115)
* 6131 NFC (RM-216)
* 6136 (RM-199)
* 6151 (RM-200)
* 6233 (RM-145)
* 6234 (RM-123)
* 6280/6288 (RM-78)
* 6290 (RM-176)
* 6300 (RM-217)
* 6300b (RM-222)
* 7370 (RM-70)
* 7373 (RM-209)
* 7390 (RM-140)
* 8600 (RM-164)
* E50 (RM-170)
* E50 (RM-171)
* E50 (RM-172)
* E61 (RM-89)
* E61i (RM-227)
* E62 (RM-88)
* E65 (RM-208)
* N73-1 (RM-133)
* N73-5 (RM-132)
* N75 (RM-128)
* N76 (RM-135)
* N76 (RM-149)
* N77 (RM-194)
* N80-1 (RM-92)
* N80-3 (RM-91)
* N92 (RM-100)
bb5+ (SL2)
=================
* 3120C
* 3555
* 3555b
* 5310 - (V58.58; V59.59 NOT SUPPORTED)
* 5310b
* 5610
* 5610d
* 6263
* 6267
* 6300i -(V57.20 NOT SUPPORTED)
* 6301
* 6500S - (V59.60 NOT SUPPORTED)
* 6500C - (V59.45 NOT SUPPORTED)
* 6555
* 7500
* 7900
* 8800
Rapido SL2
============
* 5220 (Hash 9DD not supported)
* 5800
* 6110
* 6120c
* 6121c
* N705i
* N706i
* 6124c
* 6210
* 6220c
* 6290
* 6600
* 6650
* E51
* E63
* E66
* E71
* E75
* N78
* N79
* N81
* N81 8gb
* N82
* N85
* N95 8gb
* N96

مدلهای زیر در حال حاضر پشتیبانی نمیشوند :

RAPS_V3.03-PA_SL2 CPU
===================
* 3600 slide
* 5220 XpressMusic (RM411)
* 5220b Xpress music (RM-410)
* 7210 Supernova
* 7310 Supernova
* 7510a
* 7610 Supernova
RAP3GS_V3.02-PA_SL2 CPU
=====================
* 6600 fold
* 6600 slide
RAP3Gv3 PA_SL2 CPU (better knew as SL3)
================================
* 3600s RM-352 MCU SW 56.26
* 5310 RM-303 - MCU SW 58.58, MCU SW 59.42 .
* 6300 RM-217 - MCU SW 57.20
* 6500c RM-265 - MCU SW 59.45
* 6500s RM-240 - MCU SW 59.60
Third part Nokia Phones
==================
* 5630d (RM-431)
* 5730 XpressMusic (RM-465)
* 6208c (RM-458)
* 6216 Classic
* 6303c (RM-443)
* 6600i (RM-570)
* 6700c-1 (RM-470)
* 6720c (RM-424)
* E52 (RM-526)
* N86 (RM-484, RM-485, RM-486)
* N97 (RM-505, RM-506, RM-507

تفاوت بارز سایکلون با دیگر اینترفیس های نوکیا در آنلاک رایگان بخش SL2 RAPIDO می باشد که در دیگر اینترفیس ها با کسر کردیت می باشد ...

[boy18iran]

به روز رسانی برای Cyclone Box:

1. فیرمور جدید برای باکس Cyclone که در سرور موجود است. از طریق بخش Box Maintenance می تونید برنامه رو آپدیت کنید.
   • مشکل بوت گوشی های BB5 مدل های 5800, N97, 5220 و دیگر مدل ها برطرف شد.
   • مشکل هنگ باکس هنگام بوت گوشی های BB% برطرف شد.
   • معنی دکمه "Repower on boot" برعکس شد. یعنی:
     از این به بعد گوشی های BB5 در حین بوت به صورت خودکار دوباره پاور می شوند. (البته اگر خاموش یا گیر کرده یا غیر قابل بوت باشند.)
   • مشکل باکس در حین فلش 1208 و CP Extract (مربوط به فایل های پیش فرض گوشی) برطرف شد. دیگر پیغام "Failed to set Flashbus baud" رو نخواهید دید.
   • برقراری تماس با کابل F-BUS بهینه شد.
   • تغییر در بعضی از کدهای برنامه. بهینه شدن فلش گوشی های BB5 از طریق TX2
   • چند تغییر کوچک در برنامه و رفع چند مشکل کوچک.
2. پشتیبانی از چند مدل DCT4 برای تنظیمات قفل شبکه:
   
   RM-299 2630b v7.60
   RM-258 2760 v7.60
   RM-258 2760b v7.60
   RH-64 1600 v6.46
   RH-92 1100ib v6.46
   RH-93 1100i v6.46
   RM-291 v06.81
3. لودر جدید با نگارش 7.49.00 برای گوشی های DCT4 ارائه شد. این نگارش برای پشتیبانی از چیپ های جدید فلش می باشد.
4. افزودن لودر جدید DCT4 UEM CBUS. مشکل خواندن IMEI بخش USM سری ASIC11 برطرف شد.
5. لودر جدید برای گوشی های BB5 ارائه شد که از چیپ های فلش جدید پشتیبانی می کنه. که اینکار باعث افزایش سرعت فلش در گوشی های RAP3v3 با چیپ فلش کم سزعت Samsung با شماره 00ec2208 شده است. مانند 5200, 5310 و . . .
6. همچنین آپدیت های قبلی هم در این آپدیت وجود دارد. (BB5 RAPIDO NCK Calculator و پچ های DCT4Plus Unlock)
   
   RM-392 2680 v6.17
   RM-393 2680b v6.17
   RM-392 2680 v5.28
   RM-393 2680 v5.28
   RM-362 5000d v6.31
   RM-363 5000db v6.31

دریافت فایل آپدیت جدید

Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)
- GUI Stability improved ; updated Skins Stack
- Fixed Algoboot for BB5 phones in some configurations
- SingleLine BB5 Flashing Speed improved (upgraded to 5.5mbits from 4mbits)
- BB5 Multi-CRT Write bug fixed (mismatched certs when writing more than 1 certs at one time)
- Improved Phone LOCAL/TEST Mode Entry algorithms during unlock and FBUS operatinos
- Access Violation in some configurations, when changing BB5 Vpl / Dct4 Vpl Variant/Product - fixed
- "Set factory defaults - BB5" are now default unticked after flash (useless in case of BB5 phones)
- Repower on boot inverted ; accoring to firmware v1.0.5 , BB5 Phones are now default re-powered on boot
- By default - USE DEFAULT PROFILE while unlocking DCT4Plus is unticked
- DCT4Plus unlock routines rewritten - patch file is now applied before unlocking
- Fixed problems upon unlocking some units of DCT4(plus) phones, when Initial SP Area is corrupted
- When SIMLOCK IS NOT ACCEPTED during BB5 RPL Write, software trying to write FBUS part again after FLASHBUS part, so if NPC is corrupted, the SL will be restored anyway
- Please don't use "Erase Security" function when writing BB5 PA_SL2 RPL, because SIMLOCK will not be accepted in such case! In order of simlock rebuild, NPC MUST BE CORRECT!
- Improved BB5 RPL Write, when HWC can't be written (N96 - example), other certs being written and whole procedure is not being skipped
- After sending Simlock and Superdongle data, delay added, so PA_SL can recalculate SP and Recreate 308 if needed (previously it wasn't working all times)
- During BB5 Configuration Parse (flash chips, status), now RAM chip is displayed instead of UNKNOWN
- DCT4Plus Security Status is now being displayed upon unlock - either TAMPERED or NOT TAMPERED
- When DCT4Plus Security is NOT TAMPERED, Cyclone automatically makes Security Backup
- When user trying to unlock phone which have protected PM308 Security Block against modification, and there is message "Failed to write Security Block" software is now automaticlly writing back NPC backup - IMEI
- Erase Security while writing RPL is now by default disabled
- SX4 Bypass during PA_SL2 unlock is now by default disabled
- IMEI 1234567890?, and "?" is not valid integer bug fixed
- Cyclone Box HW Rev A113 support added
- Cyclone Box HW Rev A114 support added
- Cyclone Box HW Rev A115 support added

لیست آخرین مدلهای bb5 فاقد پشتیبانی پروسه آنلاک
تهیه شده در تاریخ 5 آگوست 2009

raps_v3.03-pa_sl2 cpu
===================
* 3600 slide
* 5220 xpressmusic (rm411)
* 5220b xpress music (rm-410)
* 7210 supernova
* 7310 supernova
* 7510a
* 7610 supernova
rap3gs_v3.02-pa_sl2 cpu
=====================
* 6600 fold
* 6600 slide
rap3gv3 pa_sl2 cpu (better knew as sl3)
================================
* 3600s rm-352 mcu sw 56.26
* 5310 rm-303 - mcu sw 58.58, mcu sw 59.42 .
* 6300 rm-217 - mcu sw 57.20
* 6500c rm-265 - mcu sw 59.45
* 6500s rm-240 - mcu sw 59.60
third part nokia phones
==================
* 5630d (rm-431)
* 5730 xpressmusic (rm-465)
* 6208c (rm-458)
* 6216 classic
* 6303c (rm-443)
* 6600i (rm-570)
* 6700c-1 (rm-470)
* 6720c (rm-424)
* e52 (rm-526)
* e72
* n86 (rm-484, rm-485, rm-486)
* n97 (rm-505, rm-506, rm-507)

لیست آخرین مدلهای تحت ساپورت سایکلون

جدیدترین فایلهای اضافه شده به ساپورت

e52-1
rm-469_caredp_1.0_swap.exe

n81-3
rm-223_apac220_22.0.002_v10.0.exe

2600c
rm-340_dp_06.00_care_sw-06.82_.exe

5800d-1
rm-356_apac_30.0.011_v7.0.exe

6303c
rm-443_dp20_4.00__sw-08.55.exe

5730s-1
rm-465_seap_100.48.122_v1.0.exe

6700c-1
rm-470_caredp_8.0_apac.exe

5530c
rm-504_lswap_10.0.050_v1.0_.exe

n97-1
rm-505_apac_11.0.021_v2.05.exe

n97-3
rm-507_nam_10.2.012_v1.0_n97-3.exe

6600i-1c
rm-570_caredp_3.0_seap.exe

6600i-1c
rm-570_caredp_3.0_swap.exe

Cyclonebox bulk update released
2009-08-10

New Bulk Update for Cyclone Box is ready, this includes:

1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

- BB5 Booting for 5800,N97,5220 and others fixed
- Fixed problem when box has been hanging up during BB5 boot
procedure.
- Meaning of "Repower on boot" button has been inverted. That means,
BB5 phones are now by default repowered during boot (more stability while dealing with dead / stucked / unbootable phones).
- Fixed box stability during 1208 flash and CP extract, no more "Failed to set Flashbus baud"

- General Improved FBUS Stack stability
- Code revised - Small speed improvment during BB5 TX2 Flashing
- Minor changes/bugfixes
2. Support for new DCT4Plus phones unlock/relock/autolock:

RM-305 1650 v5.91
RH-105 1208 v5.91
RH-105 1209 v5.91
RM-298 2630 v7.60
RM-299 2630b v7.60
RM-258 2760 v7.60
RM-258 2760b v7.60
RH-64 1600 v6.46
RH-92 1100ib v6.46
RH-93 1100i v6.46
RM-291 v06.81 (missing partial)

5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

RM-392 2680 v6.17
RM-393 2680b v6.17
RM-392 2680 v5.28
RM-393 2680 v5.28
RM-362 5000d v6.31
RM-363 5000db v6.31

Download bulkupdater from :
http://cyclonebox.com/downloads/CycloneBulkUpdate10082009.exe

Run it and click INSTALL, all patches will be applied automaticlly.
Best Regards,
CT,
Stay tuned.

آپدیت 1-09-2009

Hi, Bulk update 11-09-2009 for Cyclone Box is READY.

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !

Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

However, we added new service called "Super DCT4" inside a box.
To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.


How to check if my box is Super DCT4 Activated?
New build of sw showing this automaticlly upon launching DCT4/WD2 module, example:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,97v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work

How to activate Super DCT4 in my box?
It is very simple. Go to "Credits" module (same as you are using for calculating ASK/RPL), and click big "Activate SUPER DCT4" button. In seconds you should see similiar message:

Started Super DCT4 Activation at 03:45:20
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 4F67674F5428157448CEACEB547BC575
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Super DCT4 Activated Successfully! Credits Left: 950
Please, replug your box from USB now, and use Maintenance Function to upgrade it again.
After next upgrade, box will be activated for Super DCT4 Functions!

[vsPace]

cyclone_09_01.jpg

آخرین ورژن از نرم افزار Cyclone Box در سایت ضمیمه شد.

آپدیت 11/09/2009 !

توضیحات سایت سازنده

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it
Unlocking is FREE
(It is FIRST standalone solution (without usage of internet
(Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07

However, we added new service called "Super DCT4" inside a box. To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future). The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE

[3039]

Tropical Cyclone Strikes Again !

!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:

(پشتبانی از ASIC 3168 جهت پروسه آنلاک )

RH-86 2610 v07.04a
RH-87 2610b v07.04a
RM-258 2760 v06.82
RM-258 2760 v07.60
RM-259 2760b v06.82
RM-259 2760b v07.60
RM-298 2630 v07.60
RM-298 2630 v57.20
RM-299 2630b v07.60
RM-299 2630b v57.20
RM-340 2600c v06.82
RM-340 2600c v07.60
RM-341 2600c-b v06.82
RM-341 2600c-b v07.60
RM-391 2760h v05.45
RM-392 2680s v06.17
RM-392 2680s v56.17
RM-393 2680s-b v06.17
RM-393 2680s-b v56.17
RM-394 1680c v06.82
RM-394 1680c v07.60
RM-395 1680c-b v06.82
RM-395 1680c-b v07.60
RM-438 7100s v05.22
RM-438 7100s v05.41
RM-438 7100s v06.31
RM-438 7100s v06.32
RM-439 7100s-b v05.22
RM-439 7100s-b v05.41
RM-439 7100s-b v06.31
RM-439 7100s-b v06.32
RM-512 2330c v06.46
RM-512 2330c v06.75
RM-512 2330c v08.20
RM-513 2330c-b v06.46
RM-513 2330c-b v06.75
RM-513 2330c-b v08.20
RM-514 2320c v06.75
RM-514 2320c v08.20
RM-515 2320c-b v06.75
RM-515 2320c-b v08.20
RM-519 2720f v08.20
RM-520 2720f-b v08.20
RM-543 2323c v06.75
RM-543 2323c v08.20
RM-544 2323c-b v06.75
RM-544 2323c-b v08.20

Download updater from : http://rapidshare.com/files/29812993...te26102009.exe

[3039]

Tropical Cyclone Strikes Again !

!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:
پشتیبانی از asic3168 جهت پروسه انلاک
RH-86 2610 v07.04a
RH-87 2610b v07.04a
RM-258 2760 v06.82
RM-258 2760 v07.60
RM-259 2760b v06.82
RM-259 2760b v07.60
RM-298 2630 v07.60
RM-298 2630 v57.20
RM-299 2630b v07.60
RM-299 2630b v57.20
RM-340 2600c v06.82
RM-340 2600c v07.60
RM-341 2600c-b v06.82
RM-341 2600c-b v07.60
RM-391 2760h v05.45
RM-392 2680s v06.17
RM-392 2680s v56.17
RM-393 2680s-b v06.17
RM-393 2680s-b v56.17
RM-394 1680c v06.82
RM-394 1680c v07.60
RM-395 1680c-b v06.82
RM-395 1680c-b v07.60
RM-438 7100s v05.22
RM-438 7100s v05.41
RM-438 7100s v06.31
RM-438 7100s v06.32
RM-439 7100s-b v05.22
RM-439 7100s-b v05.41
RM-439 7100s-b v06.31
RM-439 7100s-b v06.32
RM-512 2330c v06.46
RM-512 2330c v06.75
RM-512 2330c v08.20
RM-513 2330c-b v06.46
RM-513 2330c-b v06.75
RM-513 2330c-b v08.20
RM-514 2320c v06.75
RM-514 2320c v08.20
RM-515 2320c-b v06.75
RM-515 2320c-b v08.20
RM-519 2720f v08.20
RM-520 2720f-b v08.20
RM-543 2323c v06.75
RM-543 2323c v08.20
RM-544 2323c-b v06.75
RM-544 2323c-b v08.20

Download updater from : http://rapidshare.com/files/29812993...te26102009.exe


!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

[boy18iran]

طبق آخرین اخبار از تیم Cyclone Box، سرور این باکس قدرتمند، از ساعت 16:47 به وقت GMT (گرینویچ) تحت تعمیر هست و فعلا در دست نیست.
تا خبر بعدی منتظر باشین.

فریمور جدید باکس سایکلون Cyclone Nokia Application v01.0A منتشر شد

(Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0)

ساختار: انعقاد جدید در SIGNATURE و تولید برنامه
باکس های خود را بروز کنید از طریق گزینه Maintenance

فریمور جدید باکس سایکلون - نگارش 01.0C منتشر شد

Cyclone Nokia Application v01.0C, (Nov 25 2009 03 28, gcc v4.3.2, RTOS V6.0.0)
Type: Signed Production Application

Changelog:
- SmartCard reset procedure rewritten from scratch, SC Reset takes now 20-30ms instead 0.5 - 1s
- Baud autonegotiation for SmartCards added using FI/DI ATR Parameters, this results faster card transactions, etc.
- Clock speed negotiation added for some cards (up to 20MHz)
- Added support for protocol autonegotiation (T=0, T=1), for some cards
- Added support for D5 and D6 series Cyclone Cards (TPDU problem)
- More debug messages while dealing with Smartcard added
- Minor changes and bugfixes

[simplifier]

در این نسخه خطاهای آنلاک گوشی های قدیمی سری BB5 نیز برطرف شد.

این هم لینک مربوط به دانلود:

http://www.cyclonebox.com/downloads/Cyclone.zip

این Setup جدید رو توی همون پوشه ای که cyclone نصب هست کپی کنید.

موفق باشید.

[simplifier]

Features

- Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
- Unlocking Method is now being selected before unlock
- Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
- Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

!! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!

KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.

Avaiable Unlock Methods Now:

Quote:
PM308 Recalculation (Standalone, Free)
NCK Calculation (Standalone, Free, New Method)
NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
RPL Calculation (Server Based, Need Credits)
need select needed unlock method before unlock

Download

[salehi.sajad]

سلام دوستان عزیز
امیدوارم حالتون خوب باشه
بچه من 1 ان 79 دارم که چند روز پیش آپدیتش کردم
بعد از آپدیت FM tarnsmitter گوشی از دیگه داخل پوشه موزیک نیست
گوشیمم سفارش اروپاس
میخواستم ببینم کسی می تونه راهنمایی کنه که اونا فعال کنم
مرسی دوستان